Відео

Thanks Mat, Some more stuff to play with..... :-)

Good job. You can hear some funny stuff and some very serious stuff. I’ve hear some VERY sick people flying somewhere. Heard a pilot call his base to report the “bar totals” did not add up. Would love to know how that turned out! LOL

Awesome video. I plan to build antennas like that soon.

That decoded audio sounded like some of the early voice encryption modules that split and inverted the audio frequencies.

Great video...👍

For those of us who cant guess where is the audio from?

Great Matt, Answered another of my questions on the Sig 9… I’m hoping I can go with this DXC as I don’t want stay wires, but does the antenna spin much on the mounting pole in high wind did you notice?

Thanks Matt…I’m Going for one of these in the next week or so and this gave me a nice clear closeup view of the plates and how they go together.

Is it right hand or left hand polarized? Are Immarsat L or R?

Thank you for pleasant further video watch.

crimes against humanity

You're a champion !!

Merci pour votre vidéo / présentation Antenne testée au QRA. Mais ma déception est grande Cette antenne nécessitant un ATU cela fait que l'on accord l'antenne + le coaxial + le balun + le dipôle capacitif ! Donc des pertes, le câble coaxial qui fait parti intégrante de l'antenne et rayonne [ il suffit de promener un Deep Mètre le long du feeder pour s'en rendre compte]. Une attaque du dipôle avec une ligne bi filaire serait plus appropriée en 450 Ohm par exemple, permettant de supprimer le transformateur d'impédance. Son avantage est qu'elle est un bon compromis lorsque la place manque et la recherche de discrétion. Le rapport qualité prix est très élevé, de plus avec le Brexit des frais de douanes s'applique désormais (+77 Euros pour moi payé a DHL ! ). Personnellement j'invite les OM et surtout les SWL a construire eux mêmes leur propre Dual Beam Pro Merci encore, Best regards Sir, 73's

It doesn't take much effort to understand this is stolen design. The software was open but the hardware wasn't. Sleep well. Rewarding the thief and shutting your eyes is no excuse.

needs an option to decode and ID signal type

was waiting for the line "that drone 3km away is now in my garden.."

Any current opinions on this radio

What's the difference between this MK2 & the one you did a year ago?

What are some popular and active AllStarLink node numbers?

I have a working Shari PiHat-4U.,what are some popular and active AllStarLink node numbers and AllStarLink hub numbers?

It’s narrow bandwidth due to the loading coil. Honestly you would be better to use Ten quids worth of wire as a dipole.

Well there's a deal breaker ! Less than 50 Watts above 17 meters ? No mention if there is protection for over wattage ? To...., this negates the use of any transmitter whose power can't be easily adjusted ! 🫲☹️🫴 " Bummer "

I am a newbie wishing to upgrade from a LEO satellite operator to a GEO satellite operator. Are there options to start without giving in a 10 MHz signal, a setup which builds its own signal like a stand alone HF radio or VHF/UHF radio? 73 de Jon, VU2JO

Looking for using Winlink between 2 computers and Baofengs connected to exchange email. Do you have a video on that??

Using on IC-705 with dummy load and same 3 watts produced over 40 watts. Why did your testing not output over 30w?

Since it says just on your home Wi-Fi, would 1 be able to access it from maybe work and monitor your your favorite frequency from outside of your home Wi-Fi or does it have a firewall to prevent that?

Always look forward to your videos, thank you. Bought the Sawbird+ ADS-B a couple weeks ago but haven't gotten around to installing it. Returned it to Amazon yesterday and ordered one of these. Fingers crossed.

My Techsun 660 is redundant. Without direct comparison it appears to perform as good as my Icom 756 pro. This radio is off the scale for everything a radio should be including price. Ordered another the 3rd version for other location.

This video got u a new sub. Do u have insta so I can ask u questions

Is there any difference between a vertical and horizontal antenna? I remember there use to be much less noise in horizontal mode, but these days it may not be true anymore.

How much $

Want To try it. But I’m still having a problem getting mySDR working.

I have noticed that these G63 aren't much good for UK PMR. They transmit voice to be heard on other radios but you cannot hear voice back from other UK PMR radios without pressing the top monitor button to enable voice to be heard. Any ideas how to get round this problem 😕 Besides Chirp, any other software for the Mac? Thanks.

You should try using it over the net for remote op.. Also, try some of the other codecs, it might improve the Audio some..

Hi, the monitor receivers bandwidth seemed very narrow compared to the transmitter bandwidth. This will affect the received audio as the high frequencies will be filtered out. This might have been a factor with the poor audio you demonstrated Thanks.

Perfect example of WiFi usage here would be in a restricted space installation e.g. Loft Antenna, you could simply install the radio, PSU and Antenna in the loft, no need for cable runs etc or even at a remote site with a 4/5G WiFi Router.

Nice video. To me the audio sounds rather metallic

This why we spread peace! ☮️ ⚛️ look in the middle

What is it for ?

so... Here's the thing. Back in 2020, I "upgraded" from a very small 2 bedroom "ranch" style house to a newer 5 bedroom 2 story house. All the bedrooms except the master are upstairs, the "nursery" room I selected for my office. It took a number of years to figure out how to even get wired networking up there, but finally managed to get some fiberoptic cable run between a switch in the office and my "core" switch mounted in the basement rack, 2 levels below it. Ideally, I'd like to run my radio from my desk in the office, but that leaves me in quite a sticky situation, given that American mains outlets are wired 110v, and my Ameritron AL80b needs 220v, and that isn't even accounting for coax into the office from the basement, where it goes outside to antennas. I've been on the lookout for a networked IP solution to this problem, and it seems without spending big dollars my only options are to either setup a shack in the basement which would be less than ideal, or spend big money on equipment -- big money I don't have. Something like this gets *closer* to solving my problem...

amazing

With it being Linux-based, why on earth would they NOT have a wifi server in it? Let's be honest...it's a portable field radio. Having to utilize a separate wifi connection to connect wireless is just silly in 2024 and completely impractical in the field. One should be able to connect DIRECTLY to the radio from a laptop....been doing that with the IC-705 for a few years. The 6200 has an open OS so it's not like they'd have to invent the server...tons available and functional for free. That's very disappointing.

Fixed my mood

WFView also works with IC7100 and other ICOMS AFAIK (I used it with IC7300)...

I’ve had my x6200 for two days now. I have to say it’s a great bit of kit. Quite intuitive also and I’m getting used to it fast. I’ve still to get a decent antenna rigged up I just haven’t decided what or where yet. It looks like some of the early flaws seen on the prototypes have already been fixed. Mine is on the latest May 2024 firmware so I’m guessing there will be an update very soon which hopefully will bring new features. The only issue I see at present is perhaps an under reporting on the signal meter. Other than that I’m quite happy

WOW.. Very Nice (too bad with the Mic. Audio) Did you Check you PC Mixer Settings..?? .. It sometimes has a Mic gain / Boost (Check Box ☑️) Perhaps it's Checked and over driving the Mic. Audio.

Any chance of adding something about how Allstar actually works?

Whoa, Matt! Ease upon the speed…lol

I don't know if the X6200 supports changing the filter skirts in digital mode. If it does, I'd try modifying the filter skirts for a wider passband...

If you own a pocsag pager, can you get these messages decoded on the pager directly without using this method?